MTK IMEI REPAIR

HOW TO USE Maui META IMEI REPAIR TOOL FOR MTK

Support for the latest MT65xx/67xx

****REQUIRED~****

**** DOWNLOAD TOOL HERE MauiMETA_v9.1635.23.rar****

****Install Mediatek USB VCOM drivers*******

****Get the BPLGUInfo file for the phone model from the STUCK firmware****

1.EXTRACT PROGRAMME AND RUN AS ADMINISTRATOR.

2.Wait till the Maui META dashboard appears with a red circle. Under Connection Type, select the option which best describes your device. AS IMAGE.

3.Click Reconnect at the top-right corner. The color of the circle should start changing between red and green. Switch off the phone (still with battery inside) and connect it to the PC without holding any button on the phone.

4.The phone should boot up AND get stuck at boot animation. DO NOT worry,its in META mode. The circle should now be yellow in color, indicating that the phone has been successfully detected BY TOOL.

5. In the Get version box, click -Get target version- to be sure that the phone has been detected. The phone's details should appear-

6.can now minimize get version box.

7.now click the dropdown at the top left corner and select IMEI download.

8.Now IMEI Download box should pop up. Click on Change NVRAM Database File.

9.Now navigate to the location of the~~~ BPLGUInfo file {often named like BPLGUInfoCustomAppSrcP...MT65xx), select then click Open.

10.Now note this can see the path to the DB file under NVRAM Database File. Click SIM_1 or SIM_2 depending on which you wish to write IMEI to. Now, enter the first 14 digits of the IMEI you wish to write. The digit entered in the CheckSum box will be the 15th digit of the IMEI. Once done, click Download To Flash (If IMEI keeps disappearing after factory reset then try clicking Upload From Flash instead)

11.When the IMEI has been successfully written to the selected SIM slot on the phone, you should see a message at the bottom saying Download IMEI to flash successfully.

now switch off your phone by pressing power key for some times or reinsert battery and check imei after boot using 

*#06#... 

(please subscribe our page &  YouTube channal to more tricks)